Temp-1W-UNI Pt100 Frost

$632.82

Pt-100 based low temperature sensor, 1W-UNI . External Pt-100 temperature probe (-190 to +150°C, PTFE covered cable 2m,Pt100/B) and converter included (Converter 2xPt100 1W-UNI). Second Pt-100 or Pt-1000 probe can be connected. Plug as sensor to the RJ11
Logo

Description

Pt-100 based low temperatures sensor with 1-Wire UNI output. Contains a Pt-100 temperature probe (-190 to +150°C, PTFE covered cable 2m,Pt100/B) and a 1-Wire UNI converter (Converter 2xPt100 1W-UNI). Second Pt-100 or Pt-1000 temperature probe can be connected.

Features:
  • Pt-100 based low temperatures sensor with 1-Wire UNI output.
Applications and usage:
  • Can I connect external Pt-100 or Pt-1000 temperature probes to HWg-STE plus?
    No, external Pt100 and Pt1000 probes are connected using the Converter 2xPt100 1W-UNI. This converter cannot be used with Poseidon1 products or HWg-STE (HWg-STE PoE) and HWg-STE plus web thermometers.
  • Can I use the converter with only one Pt-1000 or Pt-100 probe?
    Yes. The second probe will either read as -999.9 (indication of disconnected sensor) or turn off automatically.
  • Is there a difference between 2-wire and 4-wire connection of the external temperature probe?
    Yes, 4-wire connection allows the most accurate measurement. The difference is noticeable especially with longer wires.
  • I have an external sensor connected but Poseidon2 shows weird values (5000 °C and so on). What is the problem?
    Double-check the wiring and connection of the Pt-100 or Pt-1000 probe, according to the manual. Are the jumpers for unused terminals properly in place?
  • Can I connect any Pt-100 or Pt-1000 probe?
    Yes. You can use a genuine HW group PT100 probe, or any other Pt100 or Pt1000 temperature probe.

Additional information

Weight0.250 kg
Dimensions220 × 150 × 30 cm

Brand

HW-Group

Logo